Home > Getting Started

Getting Started

Welcome to Biscuit! This guide will help you go from unboxing to your first wireless scan in just a few minutes.

What You Need

Before you begin, make sure you have:

  • A Biscuit device – either a Biscuit Pro, Biscuit Ultra, or a supported DIY board
  • A smartphone – iPhone (iOS) or Android
  • A USB-C cable – for charging your device (Pro/Ultra) or flashing firmware (DIY)

That’s it. No laptop required, no complicated setup. Biscuit is controlled entirely from your phone.

Choose Your Path

I have a Biscuit Pro or Ultra

Great – you’re ready to go right out of the box.

First Connection Guide – Charge your device, install the app, and pair over Bluetooth. You’ll be scanning in under five minutes.

I’m building a DIY Biscuit

You can build your own Biscuit using a supported ESP32-C5 development board.

DIY Setup Guide – Flash the firmware, set up your SD card, and connect to the app.

Something isn’t working

If you’re running into issues during setup or use, we have you covered.

Troubleshooting & FAQ – LED reference tables, common issues, and frequently asked questions.